amilo-forum.com

Everything you need to know about Amilo and Lifebook laptops by Fujitsu

Installing a new inverter on an Amilo L7300

Display problems, black screen, TV-Out,...

Installing a new inverter on an Amilo L7300

Postby ozrica » Mon Sep 10, 2007 1:19 pm

Does anyone have any experience/advice of installing a new inverter on an Amilo L7300?

I have taken the screen apart and am able to identify (I think) the inverter. It sits at the bottom front below the screen in between the speakers (picture attached).

Although the part number is 12-01746-02 SystemSource have quoted this part number 12-01745-01 at £36.43.

The wires live behind thick tape or it could be a protective sleeve on one side and on the other I really don't know what it is!

Are these wires going to need solder or anything like that?

Any help or advice would be greatly received.

The reason I am doing this is the screen is black but I can see a faint image but the VGA output works perfectly.
Attachments
Inverter.jpg
ozrica
 
Posts: 3
Joined: Sun Sep 09, 2007 10:53 am

Amilo L7300 screen inverter

Postby joostlou » Sun Sep 23, 2007 8:56 pm

Dear, I have the same problem: my Amilo L7300 screen doesn't have any backlight anymore (very faint picture is still there). I assume the inverter may need replacement, but I couldn't find where to buy it. Thanks for forwarding the link or contact details of SystemSource mentioned in your message.
Did you figure out how to install the inverter or are you still waiting for a reaction on your request?

Thanks
joostlou
 
Posts: 2
Joined: Sun Sep 23, 2007 8:48 pm

Postby ozrica » Mon Sep 24, 2007 9:30 am

Sorry, the company that gave me the quote was Service Source.

Here are the contact details:

ServiceSource Europe Ltd
Stretton Green Distribution Cent
Appleton
Warrington
Cheshire
WA4 4TQ
Tel: 01925 260800
http://www.servicesource.co.uk/

I have not had any help or advice on how to fit this yet so I have not gone any further.
:cry:
ozrica
 
Posts: 3
Joined: Sun Sep 09, 2007 10:53 am

Amilo L7300 screen inverter

Postby joostlou » Fri Sep 28, 2007 8:30 pm

I meanwhile disassembled my screen and unscrewed the inverter (one screw on left side). You will see that the cables to the left and right are easily disconnected from the back of the inverter. I will go ahead and order a replacement part.
joostlou
 
Posts: 2
Joined: Sun Sep 23, 2007 8:48 pm

Postby ozrica » Sat Sep 29, 2007 4:07 pm

I too have removed the clips. I didn't see this first time as they were covered and raped in tape. I think I'll go for broke amd order an inverter next week as well.
ozrica
 
Posts: 3
Joined: Sun Sep 09, 2007 10:53 am

Re: Installing a new inverter on an Amilo L7300

Postby iremove » Mon Dec 28, 2009 12:35 pm

Hi there,

I too have this problem, i have the part number but i cant seem to get the screen dis-assembled i have removed all 6 screws and popped away the screen but its stuck in the botom right of the screen do i nned to unscrew something else or do i just try and pop it off?

{edit}
problem solved , managed to remove once id removed the button panel,

inverter removed and now looking around to order online. prices around 65 euro for new, anyone got anything better?

Thanks
iremove
 
Posts: 2
Joined: Mon Dec 28, 2009 12:31 pm


Return to Graphics, display

Who is online

Users browsing this forum: No registered users and 0 guests

cron