amilo-forum.com

Everything you need to know about Amilo and Lifebook laptops by Fujitsu

IEE1384 Problems

All about LAN/WLAN and Internet.

IEE1384 Problems

Postby jordi » Mon May 25, 2009 4:12 pm

Dear all,

I'm using WXP 32 bits SP3 and/or Ubuntu 9.04 64bits.

I have with the firewire connection. It doesn't work and no find my videocamera.

This video camera it's reconnize in other computers with WXP 32 bits SP3, or Vista.

Thank you in advanced.
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm

Re: IEE1384 Problems

Postby hikaru » Tue May 26, 2009 10:17 am

Which notebook do you have?
Can you see firewire (btw it's IEEE 1394) in the output of lspci?
Are the kernel modules you need for firewire loaded?
Does your camera require firewire 800?

Maybe this is helpful:
https://help.ubuntu.com/community/Firewire
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Tue May 26, 2009 1:30 pm

Hi,

I have a Fujitsu-Siemens Amilo Pa1510.

My camera was bought in year 2001, sorry, but I don't know what is Firewire 800.

I'll check the kernel modules loades this afternoon.

But the problem repeats in Ubuntu or WXP.

Thank you.
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm

Re: IEE1384 Problems

Postby hikaru » Tue May 26, 2009 1:44 pm

Firewire 800 (or IEEE 1394b) is a newer and faster substandard. Your notebook has Firewire 400 (IEEE 1394a). Therefore I asked if your camera needs 1394b. If it's from 2001 1394a is ok.

If you have problems in Windows and Linux it might be a hardware issue. Currently I have no Windows running so I can't really help you there.
Maybe the Firewire controller is deactivated in the BIOS. Did you check this?
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Tue May 26, 2009 2:21 pm

Thank you for your fast answer !!

I'll check the bios this afternoon also, but, what I must look for?

I only running windows for autocad or in this case, for check the IEE1394a port.

Thank you very much.
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm

Re: IEE1384 Problems

Postby hikaru » Tue May 26, 2009 2:36 pm

If the BIOS provides an option to disable firewire you should see an entry like Firewire [disabled], ieee 1394 [off] or something similar.
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Tue May 26, 2009 5:31 pm

Hi hikaru,

I've done "lscpi" and the result is:
05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)

and I've updated the BIOS (ver. 1.07c) I've checked my Bios and I don't find the firewire option.

I've done the https://help.ubuntu.com/community/Firewire recomendations.

Thank you in advanced.
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm

Re: IEE1384 Problems

Postby hikaru » Tue May 26, 2009 8:50 pm

Do you see any output in dmesg if you plug in the camera?

How is the camera powered when it is connected to your computer? In contrast to the 6-pin firewire of a desktop computer the 4-pin firewire of your amilo can't power it. You'll need an external power pack or the camera has to run on its own battery. Not all cameras support this.
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Wed May 27, 2009 7:35 am

Hi hikaru,

When I plug the firewire in the camera, the camera touch screen shows "DV IN" message, and the camera is powered with external power.

Thank you in advanced.
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm
Notebook:
  • Amilo Pa-1510

Re: IEE1384 Problems

Postby hikaru » Wed May 27, 2009 8:07 am

What about dmesg?
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Wed May 27, 2009 12:32 pm

Hi hikaru

This afternoon I'll do "dmesg > output_file".

I think it's correct.

Thank you
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm
Notebook:
  • Amilo Pa-1510

Re: IEE1384 Problems

Postby hikaru » Wed May 27, 2009 12:45 pm

It's important to see what happens when you plug in the camera. So the best think would be to call dmesg before the camera is connected, plug it in and call dmesg again.
Then you should see some additional lines. This is the important part.
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Wed May 27, 2009 6:54 pm

Hi hikaru

I've done dsmeg >dsmeg1 when starts ubuntu, and after dsmeg >dsmeg2 when plug the videocamera and I don't find differences between the two files.

This is the first file dsmeg1 (when starts ubuntu):
95.141026] wlan0: no IPv6 routers present
[ 145.068884] wlan0 direct probe responded
[ 145.068891] wlan0: authenticate with AP 00:1c:df:c6:1c:f8
[ 145.070636] wlan0: authenticated
[ 145.070640] wlan0: associate with AP 00:1c:df:c6:1c:f8
[ 145.074686] wlan0: RX ReassocResp from 00:1c:df:c6:1c:f8 (capab=0x431 status=0 aid=2)
[ 145.074689] wlan0: associated
[ 148.084224] wlan0: deauthenticated
[ 149.085072] wlan0: direct probe to AP 00:1c:df:c6:1c:f8 try 1
[ 149.089761] wlan0 direct probe responded
[ 149.089770] wlan0: authenticate with AP 00:1c:df:c6:1c:f8
[ 149.092800] wlan0: authenticated
[ 149.092806] wlan0: associate with AP 00:1c:df:c6:1c:f8
[ 149.097436] wlan0: RX ReassocResp from 00:1c:df:c6:1c:f8 (capab=0x431 status=0 aid=2)
[ 149.097442] wlan0: associated


And this is dsmeg >dsmeg2 when plug the videocamera:

20.656555] [drm] Setting GART location based on new memory map
[ 20.657096] [drm] Loading R300 Microcode
[ 20.657115] [drm] Num pipes: 1
[ 20.657121] [drm] writeback test succeeded in 1 usecs
[ 24.173295] eth0: link down
[ 24.173856] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.225069] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.226125] wlan0: direct probe to AP 00:18:9b:61:f2:9e try 1
[ 26.424059] wlan0: direct probe to AP 00:18:9b:61:f2:9e try 2
[ 26.624062] wlan0: direct probe to AP 00:18:9b:61:f2:9e try 3
[ 26.828048] wlan0: direct probe to AP 00:18:9b:61:f2:9e timed out
[ 82.517041] Clocksource tsc unstable (delta = -275858939 ns)
[ 84.858984] wlan0: authenticate with AP 00:1c:df:c6:1c:f8
[ 84.861695] wlan0: authenticated
[ 84.861708] wlan0: associate with AP 00:1c:df:c6:1c:f8
[ 84.865482] wlan0: RX AssocResp from 00:1c:df:c6:1c:f8 (capab=0x431 status=0 aid=2)
[ 84.865492] wlan0: associated
[ 84.867276] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 88.613016] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00a90000
[ 89.617028] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00a90000
[ 95.141026] wlan0: no IPv6 routers present
[ 145.068884] wlan0 direct probe responded
[ 145.068891] wlan0: authenticate with AP 00:1c:df:c6:1c:f8
[ 145.070636] wlan0: authenticated
[ 145.070640] wlan0: associate with AP 00:1c:df:c6:1c:f8
[ 145.074686] wlan0: RX ReassocResp from 00:1c:df:c6:1c:f8 (capab=0x431 status=0 aid=2)
[ 145.074689] wlan0: associated
[ 148.084224] wlan0: deauthenticated
[ 149.085072] wlan0: direct probe to AP 00:1c:df:c6:1c:f8 try 1
[ 149.089761] wlan0 direct probe responded
[ 149.089770] wlan0: authenticate with AP 00:1c:df:c6:1c:f8
[ 149.092800] wlan0: authenticated
[ 149.092806] wlan0: associate with AP 00:1c:df:c6:1c:f8
[ 149.097436] wlan0: RX ReassocResp from 00:1c:df:c6:1c:f8 (capab=0x431 status=0 aid=2)
[ 149.097442] wlan0: associated

Thank you for your time
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm
Notebook:
  • Amilo Pa-1510

Re: IEE1384 Problems

Postby hikaru » Thu May 28, 2009 3:10 pm

So your camera isn't detected at all.
How do you connect it to your notebook? Are there any hints in the manual if the camera should already be running when you connect it? Does it have to be in a specific mode?

Can you test other firewire devices with your notebook?
User avatar
hikaru
Moderator
 
Posts: 1153
Joined: Thu Oct 25, 2007 9:23 am
Notebook:
  • Amilo Si 1520
  • Desktop
  • Asus EEE 901

Re: IEE1384 Problems

Postby jordi » Thu May 28, 2009 4:12 pm

Hi,

I connect my camera in VCR mode. I've connected my camera in my brother's computer with WXP and the videocamera runnings ok.

Friday, I'll connect my brother's camera (is the same model than mine) on my laptop and I'll send news.

It seems that my laptop firewire port doesn't work.

Thank you.
jordi
 
Posts: 10
Joined: Mon May 25, 2009 3:15 pm
Notebook:
  • Amilo Pa-1510

Next

Return to Networking and Internet

Who is online

Users browsing this forum: No registered users and 0 guests

cron