amilo-forum.com

Everything you need to know about Amilo and Lifebook laptops by Fujitsu

Amilo Pro V2010 no display Topic is solved

Display problems, black screen, TV-Out,...

Amilo Pro V2010 no display  Topic is solved

Postby gnome » Tue Jan 30, 2007 1:07 pm

My amilo pro V2010 display is only showing a very dim image, the backlight is not operating. I have removed the screen bezel and flicked the micro switch on the right of the laptop. This did allow the backlight to operate for a few hours. After the laptop lid was closed (after replacing the bezel ! ) I have been unable to get the backlight to operate again. Windows loads as normal and with a little care the cursor can be seen and the operator name clicked onto to allow windows to load fully, which it does. However I cannot get an external monitor to work either, during the load up sequence just the portion where the windows logo shows appears. I am not sure if this is a hardware problem or whether I have a software glitch which is not allowing the display to work properly. Any help will be much appreciated.
gnome
 
Posts: 14
Joined: Tue Apr 11, 2006 7:14 pm

Postby gnome » Tue Feb 13, 2007 1:17 pm

Update, I have now managed to get the laptop to boot in safe mode only onto an external monitor. The laptop screen shows a very faint image. By flicking the microswitch underneath the screen allows the backlight to flicker on for an instant but the laptop screen is no longer useable. Is it feasible to turn off the power saving system and so bypass the micro switch. Would this allow the backlight and laptop screen to operate on boot up?
gnome
 
Posts: 14
Joined: Tue Apr 11, 2006 7:14 pm

external screen now working

Postby gnome » Wed Mar 07, 2007 4:27 pm

I finally managed to get an external screen working. I have the "rescue" disk, during the XP load I discovered that a cut down version had been loaded with minimum drivers. So I can now use an external monitor. The fault is almost certainly the micro switch. Any one have any idea where I can obtain a replacement?
gnome
 
Posts: 14
Joined: Tue Apr 11, 2006 7:14 pm

Postby aspettl » Wed Mar 07, 2007 7:45 pm

Replacement: ask FSC where to get spare parts. But I'm not sure it is that easy to replace the switch or that it even is the cause of your problem.
Unfortunately I don't know of any way to get the lid state in Windows, so you could be sure that it is the switch.
There is an option to activate standby when lid is closed (energy options), but I don't know how this option behaves if Windows sees the lid always as closed (even at startup).

Regards
Aaron
User avatar
aspettl
Site Admin
 
Posts: 1347
Joined: Sat Mar 25, 2006 3:31 pm
Location: Germany
Notebook:
  • Lifebook E8020D

Sorted ! ! !

Postby gnome » Fri Jul 20, 2007 10:42 am

It was the screen inverter at fault, replaced and now working fine. :lol:
gnome
 
Posts: 14
Joined: Tue Apr 11, 2006 7:14 pm

Re: Amilo L7300 no display

Postby Amilo2 » Sat Apr 18, 2009 8:01 pm

Hi Gnome,

I have the same problem with backlight inverter for Amilo L7300. where did you get your inverter from please? i need one.
thank you
Amilo2
 
Posts: 1
Joined: Sat Apr 18, 2009 7:41 pm

Re: Amilo Pro V2010 no display

Postby gnome » Wed Apr 22, 2009 8:40 am

I managed to find one on e-bay, however I also managed to get a spare, since then I have sold the Amilo Pro V2010, so the inverter is for sale if you are interested.
gnome
 
Posts: 14
Joined: Tue Apr 11, 2006 7:14 pm

Re: Amilo Pro V2010 no display

Postby timrelton » Wed Apr 29, 2009 4:05 pm

hello
i've got exactly the same symptoms on my amilo pro.
is your second inverter still for sale?
how did you disassemble the laptop to get at it?
thanks
timrelton@hotmail.com
timrelton
 
Posts: 1
Joined: Wed Apr 29, 2009 3:59 pm

Re: Amilo Pro V2010 no display

Postby vinnar1975 » Sat Sep 19, 2009 5:25 pm

hello
hay you stil have the display card
i realy need that card
pls send me that one
ok
vinay
vin_nar@rediffmail.com
vinnar1975
 
Posts: 2
Joined: Sat Sep 19, 2009 5:15 pm


Return to Graphics, display

Who is online

Users browsing this forum: No registered users and 0 guests

cron