amilo-forum.com

Everything you need to know about Amilo and Lifebook laptops by Fujitsu

on windows logo i get a blue screen and computer reboots

All problems with windows and windows drivers.

on windows logo i get a blue screen and computer reboots

Postby saban12 » Sat Feb 10, 2007 11:54 pm

I have managed to integrate drivers for SATA so the disk is recognized during winXP(pro) install.

Installation goes smoothly but when it reaches the windows logo it just gives me a blue screen for a second and then computer reboots

Notebok is Amilo Pi1556

I am really lost and in Bios there is no option to disable SATA native mode

Any ideas what should i do
Thnx
saban12
 
Posts: 7
Joined: Sat Feb 10, 2007 7:37 pm

Postby liviococcia » Fri Mar 23, 2007 7:54 am

Press F2 for the BIO's at startup
Go to the 'Advance' tab
Highlight ACPI, and change it to 'Disable'
Go to exit, and 'Exit saving changes'

And it should boot, the only thing is that the Hardrives may not be seen as SATA drives anymore, but normal ATA, and maybe your sound will go, but thats another problem, it's all to do with the Hardrive drivers and the fact that the sound card works in High Definition mode, and i think needs a SATA Hardrive setup.

regards
liviococcia
 
Posts: 9
Joined: Thu Mar 22, 2007 7:49 am

Postby saban12 » Fri Apr 13, 2007 8:34 am

thnx will try that and let you know
saban12
 
Posts: 7
Joined: Sat Feb 10, 2007 7:37 pm


Return to Windows

Who is online

Users browsing this forum: No registered users and 0 guests

cron